Fuse and jumper locations, Select the drive to be configured, and then press, Or choose – Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR User Manual
Page 192
Advertising
![background image](/manuals/578467/192/background.png)
Publication 1398-5.0 – October 1998
11-4
Maintenance and Troubleshooting
7. Select the drive to be configured, and then press
ENTER
or
choose
OK
to load the parameters into the personality module.
Figure 11.1
Fuse and Jumper Locations
Intro
+24VDC
+5VDC
ENCODER
Remove JUMPERS P6 and P5
to power I/O circuitry with
an external power source.
FUSE
FUSE
FUSE
SPARE
FUSE
PERSONALITY MODULE
Advertising