Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 259)

Publication 1398-5.0 – October 1998
TouchPad Instructions C-13
TouchPad Lists
Table C.5: Drive Communications Parameter List for the TouchPad
Display Parameter
00 7 Data Bits, 1 Stop Bit, Even Parity
01 7 Data Bits, 1 Stop Bit, Odd Parity
02 8 Data Bits, 1 Stop Bit, No Parity
03 8 Data Bits, 1 Stop Bit, Even Parity
04 8 Data Bits, 1 Stop Bit, Odd Parity
Table C.6: Baud Rate Parameter List for TouchPad
Display Parameter
00 1200 Baud
01 2400 Baud
02 4800 Baud
03 9600 Baud
04 19200 Baud
Table C.7: Encoder Output Parameter List for TouchPad
Display Parameter
÷ by 1 Divide Encoder counts by 1
÷ by 2 Divide Encoder counts by 2
÷ by 4 Divide Encoder counts by 4
÷ by 8 Divide Encoder counts by 8
Table C.8: IO Mode Parameter List for TouchPad
Display Parameter a
Inc Incremental Indexing
Abs Absolute Indexing
Reg Registration Indexing
a. Parameters available only if the drive supports Indexing.