Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 207)

Publication 1398-5.0 – October 1998
Appendix A
Options and Accessories
Appendix A
ULTRA 200 Series drives conformance to the European Union
Directives is contingent on:
●
Installation of AC line filters between the power source and the
drive, and
●
Use of Allen-Bradley cables to connect F-, H-, N- or Y- motors to
a 1398-DDM-010, 1398-DDM-010X, 1398-DDM-020,
1398-DDM-020X, 1398-DDM-030, 1398-DDM-030X,
1398-DDM-075, 1398-DDM-075X, 1398-DDM-150 or
1398-DDM-150X drive. Diagrams and schematics for all
Allen-Bradley cables are shown in Appendix B, “Cable
Diagrams, Schematics and Examples”.
ULTRA 200 Series Drives
Model Description
1398-DDM-010 1000 Watt Universal Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-010X 1000 Watt Universal Indexing Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-020 2000 Watt Universal Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-020X 2000 Watt Universal Indexing Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-030 3000 Watt Universal Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-030X 3000 Watt Universal Indexing Drive,
single phase 100-240 VAC @ 50/60 Hz
1398-DDM-075 7500 Watt Universal Drive,
single or three phase 100-240 VAC @ 50/60 Hz
1398-DDM-075X 7500 Watt Universal Indexing Drive,
single or three phase 100-240 VAC @ 50/60 Hz
1398-DDM-150 15000 Watt Universal Drive,
three phase 100-240 VAC @ 50/60 Hz
1398-DDM-150X 15000 Watt Universal Indexing Drive,
three phase 100-240 VAC @ 50/60 Hz