List – Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR User Manual

Page 253

Advertising
background image

Publication 1398-5.0 – October 1998

TouchPad Instructions

C-7

For example: If the SpeedWin setting is

5000

rpm and the

Maximum Speed in the motor table is

5200

, pressing the

key

increases the parameter to

5200

(the upper limit), but pressing the

key decrements the parameter to

4000

.

The most significant digit is reserved when a parameter allows a
negative (-) setting or the parameter provides a list of possible
selections. The

or

key toggles the minus sign.

List

The most significant digit is reserved for an active/inactive selection
marker when a parameter provides a list of possible selections.

A filled arrow,

, in the most significant digit indicates the active

setting from a list of possible settings. Inactive settings are
indicated by a unfilled arrow,

.

For example: If the drive is functioning as Preset Controller in the
Velocity mode, pressing the

key from DRVPARAM scrolls

through the

CmdSrc

list which includes

Presets

,

AuxEnc

,

StepDir

,

StepU/D

, and

Analog

.

The Mode/Enter,

, key selects a parameter from the list.

List selections that are undefined are indicated by

Unknown

.

This display indicates the TouchPad data table is incompatible
with the drive.

Lists are associated with all parameters, except

DISPLAY

and

DRVINFO

. Refer to page C-13 for items in each list. Table C.17,

“Drive Status List for TouchPad” on page C-16 is read-only; all other
lists contain possible parameter selections. After an option is selected,
the display reverts to the parameter from which the option was
selected.

For example: Selection of the EncAlign parameter under STATUS
provides the options

Normal and

Align. Selection of either

option returns you to the EncAlign display.

Advertising