Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 41)

Publication 1398-5.0 – October 1998
ULTRA Master Installation 3-3
Starting and Quitting
ULTRA Master Version Level
The release level and date for ULTRA Master may be displayed by
selecting
A bout ULTRA Master from the Help menu. This
information also appears in the initial ULTRA Master screen. The
About ULTRA Master window includes additional data about system
resources typically displayed in Windows Help.
The ULTRA Master Start-Up Screen
When ULTRA Master starts for the first time, its default instructions
are:
●
Display the Help menu - Quick Start.
●
Present the Drive Select window. The Drive Select window offers
Drive 0, which is the default drive address assigned at the factory.
The default ULTRA Master Start-up screen is shown below. The
comments point out many of the Windows controls that are available
in ULTRA Master.
Setup automatically creates the ULTRA Master program group and
then returns you to Windows. The ULTRA Master program group
provides access to the ULTRA Master application icon,
Note: ULTRA Master displays the Help menu – Quick Start – when
it is first accessed. To disable this automatic display, deselect the menu
item
Show Quick Start from the Help menu.
Tool bar buttons provide
quick access to common
commands and windows
Hypertext links to specific
items in online Help
Status bar reveals current
menu selection and status
information
Buttons perform typical Windows functions such as
sizing or scrolling, opening or closing windows.
RˆvpxÃT‡h ‡
Pop-up menus accesses
PC-based commands
Online Help explains tasks
and commands