Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 43)

Publication 1398-5.0 – October 1998
Chapter 4
Unpacking, Inspecting and Storing
Chapter 4
This chapter describes four steps which should ensure that the drive
functions correctly. The steps include:
●
Unpacking the ULTRA 200 Series drive
●
Inspecting the drive for shipping damage
●
Testing the basic functionality of the drive
●
Guidelines for storing the drive.
Unpacking the Drive
1. Remove the ULTRA 200 Series drive from the shipping carton
and remove all packing materials from the unit. The materials and
carton may be retained for storage or shipment of the drive.
2. Check all items against the packing list. A label located on the
side of the unit identifies:
• model number
• serial number
• manufacturing date code.
Inspection Procedure
To protect your investment and ensure your rights under warranty, we
recommend the following steps be performed upon receipt of the unit:
●
Inspect the unit for any physical damage that may have been
sustained during shipment.
●
Perform the drive checkout test to verify the functionality of the
unit.
If you find damage, either concealed or obvious, contact your buyer to
make a claim with the shipper. If degraded performance is detected
when testing the unit, contact your distributor or Allen-Bradley to
obtain a Return Material Authorization (RMA). Do this as soon as
possible after receipt of the unit.