Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 20)

Publication 1398-5.0 – October 1998
Intro-18 Preface
All documentation for both the Host Commands and ULTRA Master
is on-line. Host Command information is available through a
comprehensive on-line reference manual. ULTRA Master information
is available through Help menus. The on-line documents provide in-
depth explanations of the Host Command language as well as the
menus, windows and dialog boxes that make ULTRA Master a
convenient method for programming ULTRA 200 Series drives.
●
To access the Host Command Reference
Click on the Host Command Reference icon in the
ULTRA Master program group.
●
To access ULTRA Master Help
Open ULTRA Master by clicking on the ULTRA Master icon in
the ULTRA Master group, and
Press the F1 key.
TouchPad
The optional TouchPad may be used to monitor and configure the
ULTRA 200 Series drive. The TouchPad command structure is similar
to the structure of ULTRA Master, but operates through an
abbreviated keypad interface. The card TouchPad Instructions is
provided with the TouchPad. It describes the installation and
operational instructions in a pocket-sized directory. The TouchPad
Command Tree Card and additional instructions for the TouchPad are
included in the section titled, “TouchPad Instructions” which begins
on page C-1. The TouchPad Command Tree Card is a graphical
presentation of both the operational instructions and the command
structure for the ULTRA 200 Series drives. You may find it
convenient to refer to the card when using the TouchPad with a drive.