Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 36)

Publication 1398-5.0 – October 1998
2-6 Selecting Other System Components
Motors
The ULTRA 200 Series is compatible with many motors, both
Allen-Bradley motors and motors from other manufacturers. Drive
and motor parameters for all compatible Allen-Bradley motors are
programmed into each ULTRA 200 Series drive at the factory.
Allen-Bradley motors that are compatible with the ULTRA 200 Series
of drives include all:
●
F-Series
●
H-Series
●
N-Series
●
Y-Series
ULTRA Master software speeds drive and motor set up by predefined
parameters for each drive and motor combination.
Refer to the Torque/Speed curves in the Allen-Bradley standard
product catalog and handbook (Publication 1398-2.0) or contact your
local Allen-Bradley distributor for motor sizing and compatibility
assistance.
Custom motors or motors not manufactured by Allen-Bradley may be
used with the ULTRA 200 Series. Appendix D, “Creating Custom
Motor Files” explains how to configure the drive to control a custom
motor.