HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 12)

Fundamentals
TNC model, software and features
12
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
New functions
New functions 73498x-02
DXF files can be opened directly on the TNC in order to extract
contours and point patterns ("Programming: Data transfer from
CAD files", page 249).
The active tool-axis direction can now be activated in manual
mode and during handwheel superimposition as a virtual tool axis
("Superimposing handwheel positioning during program run: M118
(Miscellaneous Functions software option)", page 362).
Writing and reading data in freely definable tables ("Freely definable
tables", page 380).
New touch probe cycle 484 for calibrating the wireless TT 449 tool
touch probe (see User's Manual for Cycles).
The new HR 520 and HR 550 FS handwheels are supported
("Traverse with electronic handwheels", page 435).
New machining cycle 225 ENGRAVING (see User’s Manual for
Cycle Programming)
New Active Chatter Control (ACC) software option ("Active Chatter
Control ACC (option 145)", page 373).
New manual probing cycle "Center line as datum" ("Setting a center
line as datum ", page 485).
New function for rounding corners ("Rounding corners: M197",
page 368).
External access to the TNC can now be blocked with a MOD
function ("External access", page 535).