HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 478)

Manual operation and setup
14.9 Compensating workpiece misalignment with 3-D touch probe
(option 17)
14
478
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Displaying a basic rotation
When you select the PROBING ROT function, the TNC displays
the active angle of basic rotation in the dialog Rotation angle. The
TNC also displays the rotation angle in the additional status display
(
STATUS POS.).
In the status display a symbol is shown for a basic rotation
whenever the TNC is moving the machine axes according to a basic
rotation.
Canceling a basic rotation
Select the probe function by pressing the PROBING ROT soft
key
Enter a rotation angle of zero and confirm with the
SET BASIC
ROTATION soft key
Terminate the probe function by pressing the END soft key