HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 457)

Datum management with the preset table 14.5
14
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
457
Rescind write-protection
To edit a line you have previously write-protected, proceed as
follows:
Press the CHANGE PRESET soft key
Select the LOCKED column
Press the EDIT CURRENT FIELD soft key
Datum protected without password:
Press the soft key. The TNC rescinds write-
protection.
Datum protected with password:
Press the soft key
Enter the password into the pop-up window
Confirm with the
OK soft key or the ENT key: The
TNC rescinds write-protection.