HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 450)

Manual operation and setup
14.4 Optional safety concept (functional safety FS)
14
450
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Additional status displays
On a control with functional safety FS, the general status display
contains additional information about the current status of safety
functions. The TNC shows this information as operating statuses of
the status displays
T, S and F
Status display Brief description
STO Energy supply to the spindle or a feed drive
is interrupted.
SLS Safely-limited speed: A safely limited speed
is active.
SOS Safe operating stop: Safe operating stop is
active.
STO Safe torque off: Energy supply to the motor
is interrupted.
The TNC shows the active safety-related mode of operation with an
icon in the header to the right of the operating mode text:
Button Safety-related operating mode
SOM_1 operating mode active
SOM_2 mode active
SOM_3 mode active
SOM_4 mode active