HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 366)

Programming: Miscellaneous functions
10.4 Miscellaneous functions for path behavior
10
366
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Deleting basic rotation: M143
Standard behavior
The basic rotation remains in effect until it is reset or is overwritten
with a new value.
Behavior with M143
The TNC erases a programmed basic rotation from the NC
program.
The function
M143
is not permitted during mid-
program startup.
Effect
M143 is effective only in the block in which it is programmed.
M143 becomes effective at the start of the block.