HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 131)

Working with the file manager 3.4
3
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
131
The TNC in a network
To connect the Ethernet card to your network, see
"Ethernet interface ", page 547.
The TNC logs error messages during network
operation, see "Ethernet interface ", page 547.
If the TNC is connected to a network, the left directory window
displays additional drives (see figure). All the functions described
above (selecting a drive, copying files, etc.) also apply to network
drives, provided that you have been granted the corresponding
rights.
Connecting and disconnecting a network drive
To select the program management: Press the
PGM MGT key. If necessary, press the WINDOW
soft key to set up the screen as it is shown at the
upper right
To select the network settings: Press the
NETWORK soft key (second soft key row).
To manage the network drives: Press the
DEFINE
NETWORK CONNECTN. soft key. In a window
the TNC shows the network drives available for
access. The soft keys described below are used to
define the connection for each drive
Function Soft key
Establish the network connection. If the
connection is active, the TNC marks the
Mount column.
Connect
Disconnect the network connection Unmount
Automatically establish network connection
whenever the TNC is switched on. The TNC
marks the
Auto column if the connection is
established automatically
Auto
Set up new network connection Add
Delete existing network connection Remove
Copy network connection Copy
Edit network connection Machining
Delete the status window Clear