HEIDENHAIN TNC 620 (81760x-02) ISO programming User Manual
Page 564
Tables and overviews
18.1
Machine-specific user parameters
18
564
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Parameter list
Parameter settings
DisplaySettings
Settings for screen display
Sequence of displayed axes
[0] to [7]
Depends on available axes
Type of position display in position window
NOMINAL
ACTUAL
REFACTL
REFNOML
LAG
ACTUAL DIST
DIST
M 118
Type of position display in status display
NOMINAL
ACTUAL
REF ACTL
REF NOML
LAG
ACTUAL DIST
DIST
M 118
Definition of decimal separation characters for position display
.
Display of feed rate in Manual Operation mode
at axis key: Only show feed rate when axis-direction key is pressed
always minimum: Always show feed rate
Display of spindle position in the position display
during closed loop: Only show spindle position when spindle is in position control
during closed loop and M5: Show spindle position when spindle is in position
control and with M5
Show or hide Preset table soft key
True: Do not display Preset table soft key
False: Display Preset table soft key