Moving the machine axes 14.2 – HEIDENHAIN TNC 620 (81760x-02) ISO programming User Manual
Page 437
Moving the machine axes 14.2
14
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
437
Handwheel display
1
Only with wireless handwheel HR 550 FS
: Shows whether
the handwheel is in the docking station or whether wireless
operation is active
2
Only with wireless handwheel HR 550 FS:
Shows the field
strength, 6 bars = maximum field strength
3
Only with wireless handwheel HR 550 FS:
Shows the charge
status of the rechargeable battery, 6 bars = fully charged A bar
moves from the left to the right during recharging
4
ACTL: Type of position display
5
Y+129.9788: Position of the selected axis
6
*: STIB (control in operation); program run has been started or
axis is in motion
7
S0:: Current spindle speed
8
F0: Feed rate at which the selected axis is moving
9
E: Error message
10
3D: Tilted-working-plane function is active
11
2D: Basic rotation function is active
12
RES 5.0: Active handwheel resolution. Distance in mm/rev
(°/rev for rotary axes) that the selected axis moves for one
handwheel revolution
13
STEP ON or OFF: Incremental jog active or inactive. If the
function is active, the TNC also displays the active jog
increment
14
Soft-key row: Selection of various functions, described in the
following sections
14
4
12
5
8
7
7
10
3
2
1
11
13
7
9
7
6