HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 83)

Remote Desktop Manager (option 133) 2.6
2
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
83
2.6 Remote Desktop Manager
(option 133)
Introduction
The Remote Desktop Manager enables you to display external
computer units on the TNC screen that are connected via Ethernet
and to operate them over the TNC. You can also start programs
specifically under HeROS or display web pages of an external
server.
The following connection options are available:
Windows Terminal Server (RDP): Displays the desktop of a
remote Windows computer on the control
Windows Terminal Server (RemoteFX): Displays the desktop
of a remote Windows computer on the control
VNC: Connection to an external computer (e.g. HEIDENHAIN-
IPC). Displays the desktop of a remote Windows or Unix
computer on the control
Switch-off/restart of a computer: Available only to authorized
specialists
World Wide Web: Available only to authorized specialists
SSH: Available only to authorized specialists
XDMCP: Available only to authorized specialists
User-defined connection: Available only to authorized
specialists
HEIDENHAIN assures a functioning connection
between HeROS 5 and the IPC 6341. HEIDENHAIN
cannot guarantee the correct function of any other
combinations or connections to external devices.