HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 267)

DXF converter (option 42) 7.3
7
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
267
Element information
In the element information window, the TNC displays the
coordinates of the machining position that you last selected via
mouse click in the list view window or graphics window.
You can also use the mouse to change the graphic display. The
following functions are available:
In order to rotate the model shown in three dimensions you
hold the right mouse button down and move the mouse.
To shift the model shown: Hold the center mouse button or the
wheel button down and move the mouse.
To zoom in on a certain area: Mark a zoom area by holding
the left mouse button down. After you release the left mouse
button, the TNC zooms in on the defined area.
To rapidly magnify or reduce any area: Rotate the mouse wheel
backwards or forwards.
To return to the standard display: Press the shift key and
simultaneously double-click with the right mouse key. The
rotation angle is maintained if you only double-click with the
right mouse key.