HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 584)

Tables and overviews
18.3 Technical information
18
584
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
DXF Converter (option 42)
DXF converter Supported DXF format: AC1009 (AutoCAD R12)
Adoption of contours and point patterns
Simple and convenient specification of reference points
Select graphical features of contour sections from conversational
programs
KinematicsOpt (option 48)
Optimizing the machine
kinematics Backup/restore active kinematics
Test active kinematics
Optimize active kinematics
Extended Tool Management (option 93)
Extended tool management Python-based
Spindle Synchronism (option 131)
Spindle synchronization Synchronization of milling spindle and turning spindle
Remote Desktop Manager (option 133)
Remote operation of external
computer units Windows on a separate computer unit
Incorporated in the TNC interface
Cross Talk Compensation – CTC (option 141)
Compensation of axis couplings Determination of dynamically caused position deviation through axis
acceleration
Compensation of TCP (
T ool C enter P oint)
Position Adaptive Control – PAC (option 142)
Adaptive position control Changing of the control parameters depending on the position of
the axes in the working space
Changing of the control parameters depending on the speed or
acceleration of an axis
Load Adaptive Control – LAC (option 143)
Adaptive load control Automatic determination of workpiece weight and frictional forces
Changing of control parameters depending on the actual mass of
the workpiece
Active Chatter Control – ACC (option 145)
Active chatter control Fully automatic function for chatter control during machining