HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 571)

Machine-specific user parameters 18.1
18
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
571
Parameter settings
off: Error message is displayed
Geometry filter for filtering out linear elements
Type of stretch filter
- Off: No filter active
- ShortCut: Leave out single points on polygon
- Average: The geometry filter smooths corners
Maximum distance of filtered to unfiltered contour
0 to 10 [mm]: The filtered out points lie within this tolerance to the resultant
distance
Maximum length of distance resulting from filtering
0 to 1000 [mm]: Length over which geometry filtering is effective