HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 154)

Programming: Programming aids
4.8 Error messages
4
154
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Keystroke log
The TNC stores keystrokes and important events (e.g. system
startup) in a keystroke log. The capacity of the keystroke log is
limited. If the keystroke log is full, the control switches to a second
keystroke log. If this second file becomes full, the first keystroke
log is cleared and written to again, and so on. To view the keystroke
history, switch between
CURRENT FILE and PREVIOUS FILE.
Press the LOG FILES soft key
Open the keystroke log file: Press the KEYSTROKE
LOG soft key
If you need the previous log file: Press the
PREVIOUS FILE soft key
If you need the current log file: Press the
CURRENT FILE soft key
The TNC saves each key pressed during operation in a keystroke
log. The oldest entry is at the beginning, and the most recent entry
is at the end of the file.
Overview of the keys and soft keys for viewing the logs
Soft key/
Keys Function
Go to beginning of keystroke log
Go to end of keystroke log
Current keystroke log
Previous keystroke log
Up/down one line
Return to main menu