HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 393)

The PLANE function: Tilting the working plane (software option 8) 12.2
12
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
393
Defining the PLANE function
Show the soft-key row with special functions
Select the PLANE function: Press the TILT
MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row
Selecting functions
Select the desired function by soft key. The TNC continues the
dialog and requests the required parameters
Position display
As soon as a PLANE function is active, the TNC shows the
calculated spatial angle in the additional status display (see figure).
As a rule, the TNC internally always calculates with spatial angles,
independent of which
PLANE function is active.
During tilting ( MOVE or TURN mode) in the Distance-To-Go mode
( DIST), the TNC shows (in the rotary axis) the distance to go (or
calculated distance) to the final position of the rotary axis.