HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 406)

Programming: Multiple axis machining
12.2 The PLANE function: Tilting the working plane (software option 8)
12
406
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Input parameters
Axis angle A?: Axis angle to which the A axis
is to be tilted. If entered incrementally, it is the
angle
by which
the A axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
to which
the B axis
is to be tilted. If entered incrementally, it is the
angle by which the B axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
to which the C axis
is to be tilted. If entered incrementally, it is the
angle by which the C axis is to be tilted from its
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, see
"Specifying the positioning behavior of the PLANE
function", page 407
Abbreviations used
Abbreviation Meaning
AXIAL In the axial direction
NC block
N50 PLANE AXIAL B-45 .....*