HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 392)

Programming: Multiple axis machining
12.2 The PLANE function: Tilting the working plane (software option 8)
12
392
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Overview
All PLANE functions available on the TNC describe the desired
working plane independently of the rotary axes actually present on
your machine. The following possibilities are available:
Soft key Function Required parameters Page
SPATIAL Three spatial angles:
SPA, SPB, and SPC
395
PROJECTED Two projection angles:
PROPR and PROMIN
and a rotation angle
ROT
397
EULER Three Euler angles:
precession (
EULPR),
nutation ( EULNU) and
rotation ( EULROT),
398
VECTOR Normal vector for
defining the plane and
base vector for defining
the direction of the
tilted X axis
400
POINTS Coordinates of any
three points in the
plane to be tilted
402
RELATIVE Single, incrementally
effective spatial angle
404
AXIAL Up to three absolute or
incremental axis angles
A,B,C
405
RESET Resetting the PLANE
function
394