HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 130)

Programming: Fundamentals, file management
3.4 Working with the file manager
3
130
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
Data transfer to/from an external data medium
Before you can transfer data to an external data
medium, you must set up the data interface (see
"Setting up data interfaces", page 541).
Depending on the data transfer software you use,
problems can occur occasionally when you transmit
data over a serial interface. They can be overcome by
repeating the transmission.
Call the File Manager
Select the screen layout for data transfer: press
the
WINDOW soft key.
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window
Moves the highlight from the right to the left
window, and vice versa
If you wish to copy from the TNC to the external data medium,
move the highlight in the left window to the file to be transferred.
If you wish to copy from the external data medium to the TNC,
move the highlight in the right window to the file to be transferred.
Select another drive or directory: Press the SHOW
TREE soft key
Use the arrow keys to select the desired directory
Select the desired file: Press the
SHOW FILES soft
key
Use the arrow keys to select the file
Transfer a single file: Press the
COPY soft key
Confirm with the OK soft key or with the ENT key. A status
window appears on the TNC, informing about the copying
progress, or
Stop transfer: Press the WINDOW soft key. The
TNC displays the standard file manager window
again