4 any desired program as subprogram, Overview of the soft keys, Any desired program as subprogram – HEIDENHAIN TNC 620 (81760x-02) ISO programming User Manual
Page 275: Any desired program as subprogram 8.4
Advertising
Any desired program as subprogram
8.4
8
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
275
8.4
Any desired program as subprogram
Overview of the soft keys
If the
PGM CALL key is pressed, the TNC displays the following soft
keys:
Soft key
Function
Call a program with
%
Select a datum table with
%:TAB:
Select a point table with
%:PAT:
Select a contour program with
%:CNT:
Select a program with
%:PGM:
Select last selected file with
%<>%
Advertising