Yaskawa MotionSuite Series Machine Controller Programming Manual - Manual (Page 151)

MotionSuite™ Series Machine Controller Motion Programming Manual Chapter 4: Sequence Commands
4-19
Shift it 3 bits towards the right.
Supplement
With the SFR command, when a number to be shifted >=
bit width, all data with a
designated bit width becomes 0.
SFR MB00100A N3 W5;
1 1 1 1 1 • • • • • • • • • • • • • • •
9 5 0
MW00100 Before execution
0 0 0 1 1 • • • • • • • • • • • • • • • MW00100
“0” are input