Yaskawa MotionSuite Series Machine Controller Programming Manual User Manual
Page 161
Advertising
MotionSuite™ Series Machine Controller Motion Programming Manual
Chapter 4: Sequence Commands
4-29
(Ex.)
Supplement
When inputting an integer number data outside of the range of -327.68
°~327.67, the
correct result cannot be obtained.
MW00102=COS(MW00100);
(05000)
(06000)
Equivalence
0.5=COS60
°
• Integer Number Data
• Real Number Data
MF00102=COS(MF00100);
(0.5)
(60.0)
Advertising