Yaskawa MotionSuite Series Machine Controller Programming Manual - Manual (Page 9)

MotionSuite™ Series Machine Controller Programming Manual Table of Contents/Preface
viii
! ! ! ! General Cautionary Items
Cautions During Use
• The MotionSuite™ was neither designed nor manufactured for use in devices or systems under such critical
conditions as follow: Transportation systems, medical devices, aerospace, nuclear power control, submarine
relay devices, etc. Please contact Yaskawa when considering any such special application.
• Although the MotionSuite™ is manufactured under rigorous quality control, put in place safety apparatus so
that a major accident cannot occur when applying the MotionSuite™ in an installation where the occurrence
of major facilities damage or serious, life-threatening injury is anticipated due to the failure of the Motion-
Suite™.
• The pictures and diagrams in this manual are representative examples, and may differ from the product
received.
• These manuals may be changed as needed due to product improvements, specification change, or for
improvement in ease of use of the manual.
• These changes are made following updating of the document number of the manual, and its issuance as a
revised edition. The publication number of the revised edition is written on the manual cover.
• When ordering new manuals due to damage or loss, contact a Yaskawa dealer or the nearest Yaskawa corpo-
rate office listed on the cover, and give the document number.
• If the nameplate mounted on the product becomes illegible or damaged, order another nameplate from a
Yaskawa dealer or Yaskawa corporate office listed on the cover.
• Any product modified by the customer fall beyond Yaskawa’s product warranty. Yaskawa shoulders no
responsibility for any injury or damage resulting from modified products.