Yaskawa MotionSuite Series Machine Controller Programming Manual - Manual (Page 159)

MotionSuite™ Series Machine Controller Motion Programming Manual Chapter 4: Sequence Commands
4-27
(Ex.)
Supplement
When inputting an integer number data outside of the range of -327.68
°~327.67, the cor-
rect result cannot be obtained.
MW00102=SIN(MW00100);
(05000) (03000)
Equivalence 0.5=SIN30
°
• Integer Number Data
• Real Number Data
MF00102=SIN(MF00100);
(0.5) (30.0)