Fault reset methods, Refer to, 7 diagnosing and resetting faults – Yaskawa J1000 Compact V/f Control Drive User Manual
Page 150
Advertising
u
Fault Reset Methods
After the Fault Occurs
Procedure
Fix the cause of the fault,
restart the drive, and reset the
fault
Press
on the digital operator.
STOP
Fix the cause of the fault and
reset via Fault Reset Digital
Input S4.
Close then open the fault signal digital
input via terminal S4. S4 is set fault
reset as default (H1-04 = 12)
Fault Reset Switch
Drive
S4 Fault Reset Digital Input
SC Digital Input Common
If the above methods do not reset the fault, turn off the drive main
power supply. Reapply power after LED operator display is out.
ON
OFF
2
1
5.7 Diagnosing and Resetting Faults
150
YASKAWA ELECTRIC TOEP C710606 26D YASKAWA AC Drive – J1000 Quick Start Guide
Advertising