Adjusting the send level to the master effects – KORG PA4X 76 User Manual
Page 168
Advertising
164| Customizing and editing the Sound sets
Adjusting the send level to the master effects
You can adjust the level of the direct (dry) signal sent from each Sound/
channel to the master effects.
1
Go to the
Mixer/Tuning > FX Send
page.
2
On each mixer channel, use the
Master
knobs to control the level of the di-
rect (dry) signal sent to the corresponding FX processor (inside the selected
FX group).
Master 1, 2, 3
Meaning
0…127
FX Send level in MIDI values
Advertising
This manual is related to the following products: