Creating new drum kits from percussive samples, 474 creating new drum kits from percussive samples – KORG PA4X 76 User Manual
Page 478
474| Customizing and editing the Sounds
Creating new Drum Kits from percussive
samples
You can create a new Drum Kit while in
Sound
mode.
1
Go to the
Sound
mode.
2
Choose a
Drum Kit
similar to the one you are going to create.
If you prefer to start from a blank, default situation, choose the
Initialize
Sound
command from the
page menu
.
3
Go to the
Sound > DrumKit > DrumKit
page.
4
Use the
KEY
parameter to select a key. As an alternative, select it by press-
ing a key on the keyboard.
5
Select one of the available
layers
from the radio buttons under the keyboard
diagram.
6
Use the parameters in the
Drum Sample
section to assign a sample to the
current layer or the selected oscillator. Your new sample can be found in the
RAM
bank of samples.
7
Go on editing the Drum Kit, as shown in the pages dedicated to Sound edit-
ing.