Second-take recording, Punch-recording – KORG PA4X 76 User Manual
Page 328
324| Customizing, recording and editing the Songs
Second-take recording
You may want to record additional events, or replace a previously recorded
track. If so, repeat recording.
Prepare to record
1
Press the
RECORD
button to enter Record mode again. When the Song
Record Mode Select dialog box appears, select
Multitrack Sequencer
again.
2
Select the track to record.
3
Choose the
Overwrite Rec Mode
if you want to replace recorded data,
Overdub
if you want to add events to the same track.
Overdub is useful, for example, when recording different percussive instru-
ments in subsequent cycles.
Record
1
Set the
Start from
measure number to choose the alternative starting posi-
tion from where to start playback.
Select the
Start from
checkbox to activate the alternative starting position.
2
Press the
PLAY/STOP (
)
button to start recording the selected track.
3
After recording, press the
PLAY/STOP (
)
button to stop recording.
4
Repeat the same procedure for any additional track or event to record.
Exit from Record
▪
When finished recording, choose the
Exit from Record
command from the
page menu
, or press the
RECORD
button to return to the
main page
of the
Sequencer
mode.
Punch-Recording
Punch recording allows for automatic or on-the-fly start and stop of record-
ing. The Punch function will not work on an empty Song. At least one track
must already having been recorded.
Auto Punch Recording
You can let the sequencer start and stop recording for you.
1
While in the
Multitrack Sequencer
page, use the
Rec Mode
parameter to
choose the
Auto Punch
recording mode.