Programming the ec5 multiswitch, 752 programming the ec5 multiswitch – KORG PA4X 76 User Manual
Page 756
Advertising
752| Controllers
Programming the EC5 multiswitch
Programming the EC5 switches
You can connect a KORG EC5 multiswitch controller to the
EC5
connector
on the back of the instrument. This will give you a set of five programmable
switches.
1
Connect the EC5 multiswitch to the
EC5
connector.
2
Go to the
Global > Controllers > EC5
page.
3
Use the
A…E
pop-up menus to choose a control function to each of the
switches.
Advertising
This manual is related to the following products: