Lenze 9400 - Manual (Page 95)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06
95
4 Drive interface
4.2 Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.44 Prepare firmware update
• Only possible when the application has stopped and the controller is inhibited.
Possible status displays for this device command

Note!
For Lenze service only!
The
C00002 = "10000: Prepare firmware update" device command is used to set the
controller to the firmware update mode to update the firmware, if required, using the
corresponding software.
Status ( C00003 ) Meaning
655394050 Device command in process
655360000 Device command executed successfully
655360001 General fault