Hyundai HI4 - Manual (Page 109)

3. Service menu
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
----------------------------------------------------------------------------------------
3 - 40
ORIGINAL PROGRAM is copied to the TEMP1 file and be modified by user. When user push
the " OK" [PF5] key , TEMP1 is copied to TEMP2 and displays the request of Accept.
Accept of ORIGINAL PROGRAM is proceeded by exchanging files between TEMP2 and
ORIGINAL PROGRAM.
Accept are occurred to the following chart.
Hot Edit cannot operates except running mode, But when the Stop function occurs by
the user's request or other interrupt, it is possible to Request of Accept. But it
is impossible to proceed Accept unless it starts by Re-cycle request.
When user push the [CMD] or [SET], [Delete] key in manual mode, the message occurs
as follows. Do you want to proceed the Hot Edit at first? [Y/N]
When you select the (YES), It is accepted. When you select the (NO), cancel the accept
request and delete the TEMP2 file. If you select the Accept, it doesn't means new
start of re-cycle. the present Job and content of job in stack are totally changed
When you call the program, the problem can be occurred. The Call stack is cleared
and the following message occurs.
When you operate the PLAY in the condition of Call Stack cleared, it can be abnormal
operation of CALL function.
Description Accept time
Practice the job
Job requested by CALL Stating time of Re-cycle
(Accept the all files)
Job
process
ing
The other Job On the request
Apply hot edit, First ? [YES/NO]
>
Service System Rel.WAIT Cond Set
Applying initiated CALLing info.
>
Escape Apply OK