Hyundai HI4 - Manual (Page 244)

6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 80
welding completion wait is also come to an end.
6.4.1.3.4 Data copy
Outline
It can copy the data of welding condition number and sequence number to that of
other number.
Screen display
Contents of the screen
„ Selection : It selects that the data to copy is whether the welding condition number
or the welding sequence number.
„ Data number to copy : It inputs the data number to copy. ( 1 - 64 )
„ Data number to be copied : It inputs the data number to be copied.. ( 1 - 64 )
Reference
⑴ The spot welding data can be operated only in the servo gun
circumstances.
⑵ It can change the data in process of the playback.
⑶ The election of welding condition signal in the servo gun is impossible.
⑷ The deposition in the servo gun is possible only through the detection
by the outside signal.
14:39:38 *** Data Copy *** A:0 S:4
Selection =< Condition ,Sequence >
Source number =[ 1]
Destination number =[ 1]
Press [SHIFT]+[<-][->] Key.
>