Hyundai HI4 - Manual (Page 304)

7. R code
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
7 - 28
7.25 (25) R210 SERVO GUN NUMBER SELECTION
Outline
It is a code for selection of gun, in case of using multi-servo guns. It needs to execute
manual open/close of servo gun and to force manually for each gun.
Screen display
„ After select gun number, press [SET] key.
Reference
⑴ It cannot be executed during playback / operation.
⑵ Tool number will be automatically modified by selection of Gun number.
7.26 (26) R211 SQUEEZE FORCE SETTING
Outline
It sets welding force.
Screen display
„ After input wanted welding force, press [SET] key.
Reference
⑴ It cannot be executed during playback / operation.
⑵ The welding force in welding condition file, will not be changed.
⑶ In case of the setting welding force is out of the available setting boundary, it
executes manual welding force within the limited range.
Enter gun number.( 1 - 2 )
>R210,1
Service System Rel.WAIT Cond Set
Enter gun pressure. ( 50 - 999 )Kgf
>R211,100
Service System Rel.WAIT Cond Set