Hyundai HI4 User Manual
Page 195
6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 31
6.2.2 Serial port
Outline
It sets up the use purpose of the serial port, and sets up the RS232C parameter
6.2.2.1 Teach Pendant (CNTP)
Outline
This port is only for teach pendent. The user can't change freely. The following
massage is displayed on the screen if the user select 1: Teach Pendant (CNTP).
6.2.2.2 Private serial port for I/O board
Outline
This is only for I/O board. You should set up the parameter (Baud rate, character
bit, stop bit, parity bit, echo ) to match with the present I/O board.
14:39:38 * Serial port select* A:0 S:4
1: Teach Pendant (CNTP)
2: Serial to I/O Board (CNIO)
3: Serial port #1 (CNSIO)
4: Serial port #2 (OPSIO)
Use [Number]/[Up][Down] and press [SET].
>
Previous
Next
Can't modify! Private port for T/P.[ESE]
>
Previous
Next