Hyundai HI4 - Manual (Page 322)

8. Programming
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
8 - 6
8.3 EDIT COMMAND
8.3.1 Edition Screen
„ Address Area
It means the area which displays line number (1~9999) and step number(S1~S999).
„ Command Area
It means the area which displays commands. When whole line of this area selected,
that means Word cursor status.
Transfer between address area and command area can be done by using [ Х][Ц] keys.
14:39:38 *** M A N U A L *** A:0 S:H4
T0
PN:100[*]__ S/F:4/1 Sp:100.00
S1 MOVE P,S=100%,A=0,H=1
S2 MOVE P,S=30cm/min,A=0,H=1
WEAVON WEV#=1
ARCON ASF#=1
S3 MOVE L,S=30cm/min,A=0,H=1
ARCOF AEF#=1
WEAVOF
S4 MOVE P,S=30cm/min,A=0,H=1
END
Select PF menu
> S3
Service Blk.Edit Rel.WAIT Cond Set
14:39:38 *** M A N U A L *** A:0 S:H4
T0
PNo:100[*]__ SNo/F:4/1 Spd:100.00
S1 MOVE P,S=100%,A=0,H=1
S2 MOVE P,S=30cm/min,A=0,H=1
WEAVON WEV#=1
ARCON ASF#=1
MOVE L,S=30cm/min,A=0,H=1
ARCOF AEF#=1
WEAVOF
S4 MOVE P,S=30cm/min,A=0,H=1
END
Select PF menu
>
Service System Rel.WAIT Cond Set