Hyundai HI4 User Manual
Page 201
Advertising
6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 37
6.2.6 End Relay Output Time
Outline
It sets up the time until the step 0 execute again after end the program by setting
the output time of this signal when the program execute in continuous auto mode.
Screen display
Press [SET] after input the end relay output time in input frame.
Reference
⑴ If you press “ Complete” [PF5]key, Save the changed information. If press [CANCEL]
key , Cancel them.
14:39:38 *** End relay *** A:0 S:4
END relay ON time = [
0.0
] sec
Enter number and press [SET]
>[0.0 - 10.0]
Advertising