Hyundai HI4 - Manual (Page 190)

6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 26
6.2.1.10 Setting the field bus
Outline
It sets the Fieldbus parameter.
Screen display
Selecting Method
① You can enter into the sub-menu if press [SET] Key after moving the highlights bar
with using the arrow key to the item as you want to select.
② You can enter into the sub-menu if press [SET] Key after the item number as you want
to select input with using the number key in the input frame.
Reference
„ If you set up the field bus for the first time after formatting the controller,
the following massage is displayed when you select one of 4 menu.
„ You enter into the setting work with producing the ROBOT.FBU file to store the
field bus parameter if press [YES] key.
14:39:38 ** Fieldbus Config ** A:0 S:4
1: En/Disable Fieldbus Adapter
2: Select Input Source
3: Assign Input No
4: Assign Output No
Use [Number]/[Up][Down] and press [SET]
>
Previous Next
File not exist, Create file? [YES]/[NO]
>
Done