Hyundai HI4 - Manual (Page 203)

6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 39
6.2.8 External error output
Outline
This is the function that outputs the detected error no. to the external device.
Screen display
„ The serial output outputs ASCII code to the external device using serial
interface(RS232C).
Output type are
First byte : “ $”
2nd∼6th byte : “ ERROR”
7th byte : “ ” (Blank)
8th∼11th byte : error number
12th byte : C
R
13th byte : L
F
For example
In case of error 0101( E0101 )
$ E R R O R 0 1 0 1 C
R
L
F
└ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴ ─ ┴
1 2 3 4 5 6 7 8 9 10 11 12 13
„ First number designation output outputs the error number to the external device through
the O signal assigned in the “ SYSTEM” [PF2] → 2. CONTROL PARAMETER → 1. IN/OUT
SIGNAL SETTING → 6: OUTPUT SIGNAL ASSIGNMENT.
14:39:38 *** Error output *** A:0 S:4
Serial output =< Disable ,Port1,Port2>
Discrete output = <Disable, 8bit ,16bit>
Press [SHIFT]+[<-][->]
>