Hyundai HI4 - Manual (Page 78)

3. Service menu
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
3 - 9
3.1.16 Break Slip Count
Outline
You can select/ display the slip count value over the range and initialize it when
you use in stud welding(Break ON type). You must select "System[PF2]" -> 5. System
format -> 4: Setting usage of the robot, set the menu Stud in GUN1 or GUN2.
Screen display
3.1.16.1 Slip Count display/setting
Outline
It displays the number of the break slip count in each axis and it is set the slip
count by user. You must select " System[PF2] -> 5. System format -> 4: Setting usage
of the robot, set the menu Stud in GUN1 or GUN2.
Screen display
14:39:38 * Slip count display * A:0 S:4
1: Slip count display/setting
2: Slip count reset
Use [Number]/[Up][Down] and press [SET].
>
14:39:38 * Slip count display * A:0 S:4
S: [ 0 ] H :[ 0]
V: [ 0] R2:[ 0]
B: [ 0] R1:[ 0]
Enter number and press [SET]
>[0 - 65535]