Hyundai HI4 - Manual (Page 194)

6. System setting
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
6 - 30
6.2.1.10.4 Output signal assignment
Outline
It sets each signal group unit how you will map each output.
Screen display
„ Please press [SET]key after inputting Fbus data that should use the output to be
mapped in the standard output signal.
Reference
„ The first data of Fbus data is redeployed if press "ALL Form"[PF1.].
„ If you press “ Done” [PF5] key, Save the changed information. If press [CANCEL] key , Cancel
them.
Caution
⑴ Do always in the off status in case of not building in BD470. If you put in the On
status without building in BD470, All of the I/O function don't work with occurring
the error in the controller.
14:39:38*** Assign Outpur No *** A:0 S:4
Assign Output No to Fbus Data
0 O1 - O8 -> [
0 ] Fbus_0
1 O11 - O18 -> [ 1] Fbus_1
2 O21 - O28 -> [ 2] Fbus_2
3 O31 - O38 -> [ 3] Fbus_3
4 O41 - O48 -> [ 4] Fbus_4
5 O51 - O58 -> [ 5] Fbus_5
6 O61 - O68 -> [ 6] Fbus_6
Page 1/4
Set Fbus element No to map to output
>[0 - 31]
All Form Previous Next Done