Hyundai HI4 - Manual (Page 284)

7. R code
------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
7 - 8
„ Cycle Counter means the cycle number playback during run time.
It counts in step 1, it counts the cycle number in spite of stopping in half way. (It
resets the counter after 255 times during run time.)
„ GUN ON Time means the GUN signal output signal per 1 cycle during run time.
(It resets automatically after 24 hours.)
„ GUN ON Count means the counts the GUN output signal per I cycle during run time. (It
resets automatically after 65535 times.)
7.4.2 Total Run Time
Outline
Total amount of the operation time after power is ON.
Total cycle count, Total GUN On time, Total Gun ON count are as above too.
Screen display
7.4.3 Run Time Reset
Outline
(1) All data clear ..... It resets the all data.
(2) Run time clear ..... Reset the total run time.
14:39:38 *** Run time *** A:0 S:4
*Total run time =0:0: 0.00
Total cycle count =0
GUN1 time =0:0: 0.00 count=0
GUN2 time =0:0: 0.00 count=0
GUN3 time =0:0: 0.00 count=0
GUN4 time =0:0: 0.00 count=0
DI Sig waiting time =0:0: 0.00
Timer waiting time =0:0: 0.00
Press [ESC] or [R..]
>