Document Outline

• bizhub PRESS C8000/e – Main Body
• 1 Introduction
  • 1.1 Welcome
    • 1.1.1 Composition of User's Guide
    • 1.1.2 User's Guide
  • 1.2 Conventions Used in This Manual
    • 1.2.1 Symbols Used in This Manual
      • To use this machine safely
      • Procedural instruction
      • Key symbols
    • 1.2.2 Original and Paper Indications
      • Paper size
      • Paper indication
      • Tabbed paper
    • 1.2.3 Portrait Original and Landscape Original
• 2 Precautions for Installation and Use
  • 2.1 Trademarks and copyrights
    • Note
  • 2.2 SOFTWARE LICENSE AGREEMENT
    • Printing Software, Font Program and Host Software
    • For Information on Incorporated Softwares
    • About License Granted to Each Software Component
    • Printing Software, Font Program and Host Software
    • About This Software
  • 2.3 Safety Information
    • Warning and precaution symbols
    • Meaning of symbols
    • 2.3.1 Disassemble and Modification
    • 2.3.2 Power Cord
    • 2.3.3 Power Source
    • 2.3.4 Power Plug
    • 2.3.5 Grounding
    • 2.3.6 Installation
    • 2.3.7 Ventilation
    • 2.3.8 Actions in Response to Troubles
    • 2.3.9 Consumables
    • 2.3.10 When Moving the Machine
    • 2.3.11 When using the machine
    • 2.3.12 Before Successive Holidays
    • 2.3.13 Papers
    • 2.3.14 Glue Pellet
    • 2.3.15 Perfect Binder
  • 2.4 Regulation Notices
    • 2.4.1 Laser Safety
      • For Denmark Users
      • For Norway Users
      • For Finland, Sweden Users
    • 2.4.2 Ozone Release
    • 2.4.3 Electromagnetic Interference
      • For European Users
      • For German Users
      • CE Marking (Declaration of Conformity) for Users of the European Union (EU)
      • For Users in countries not subject to Class B regulations
      • LED radiation safety
  • 2.5 Warning and Caution Labels
    • 2.5.1 Caution Label on Fixing Unit
    • 2.5.2 Caution Label on Fixing Conveyance Unit
    • 2.5.3 Caution Label on Hinges of ADF
    • 2.5.4 Caution Label on Toner Recovery Box
    • 2.5.5 Caution Label on 2nd Fusing Unit EF-101
    • 2.5.6 Caution Label on Perfect Binder PB-503
    • 2.5.7 Caution Label on Finisher FS-612
    • 2.5.8 Caution Labels on Multi Punch GP-501
  • 2.6 Installation Space
  • 2.7 Operation Precautions
    • 2.7.1 Power source
    • 2.7.2 Operating environment
    • 2.7.3 Storage of printed materials
    • 2.7.4 Ozone release
    • 2.7.5 Direct sunlight
    • 2.7.6 Authentication Unit (IC Card Type) AU-201
    • 2.7.7 Data Stored in This Machine
    • 2.7.8 Precaution for use of Folding Unit and Finisher
  • 2.8 Legal Restrictions on Copying
• 3 Preparation for Use
  • 3.1 Machine Configuration
    • 3.1.1 External Machine Items
    • 3.1.2 Internal Machine Items
    • 3.1.3 Internal View of 2nd Fusing Unit EF-101
    • 3.1.4 Relay Unit RU-508 (Humidifier HM-101)
    • 3.1.5 Control Panel Layout
    • 3.1.6 Configuration of options
    • 3.1.7 Paper Feeder Unit PF-704
    • 3.1.8 Paper Feeder Unit (with scanner) PF-705
    • 3.1.9 ADF (Automatic Document Feeder)
    • 3.1.10 Folding Unit FD-503
    • 3.1.11 Saddle Stitcher SD-506
    • 3.1.12 Finisher FS-521
    • 3.1.13 Perfect Binder PB-503
    • 3.1.14 Large Capacity Stacker LS-505
    • 3.1.15 Finisher FS-612 (Punch Kit PK-512/PK-513)
    • 3.1.16 Post Inserter PI-502
    • 3.1.17 Authentication Unit (IC Card Type) AU-201
    • 3.1.18 Relay Unit RU-506
    • 3.1.19 Multi Punch GP-501
  • 3.2 Turning On/Off the Power
    • 3.2.1 Turning On the Power
    • 3.2.2 Turning Off the Power
  • 3.3 Automatically Resetting the Machine: Auto Reset
    • Setting a time interval
    • Selecting the default screen
  • 3.4 Using Machine When Power Save LED Lights
    • 3.4.1 Operation to Enable the Machine
    • 3.4.2 Automatically Conserving Energy: Auto Low Power
      • To exit Auto Low Power
    • 3.4.3 Automatically Conserving Energy: Auto Shut OFF
      • To exit Auto Shut OFF
    • 3.4.4 Manually Conserving Energy
    • 3.4.5 Limiting Machine Usage: Weekly Timer
      • To use the machine temporarily
  • 3.5 Making User Authentication/Account Track
  • 3.6 Displaying Operation Guide: Help Message
    • Help message for operating instructions
    • Help message for supply/disposal
  • 3.7 Adjusting Response Time of Touch Keys: Accessibility
• 4 Paper Information
  • 4.1 Paper Information
    • 4.1.1 Paper Weight
    • 4.1.2 Paper Tray/Exit Tray Capacity
      • Finisher FS-521 primary (main) tray capacity (not stapled)
      • Finisher FS-521 stapling capacity
      • Saddle Stitcher SD-506 standard height of folded and stapled booklets
    • 4.1.3 Paper Size
    • 4.1.4 Auto Tray Switch (ATS) Function
    • 4.1.5 To Store Paper
    • 4.1.6 Print Speed
    • 4.1.7 Correcting Unevenness in Output Image
• 5 Printing Operations
  • 5.1 Machine Screen
    • 5.1.1 Overview of the Machine Screen
    • 5.1.2 Settings on the Machine Screen
      • [Paper Setting]
      • [Both Sides Adjust]
      • [Adjustment]
      • [Controller]
      • [Curl Adjustment]
      • [Sample Print Setting]
  • 5.2 Paper Setting
    • 5.2.1 Paper Setting Outlines
    • 5.2.2 Paper Type Descriptions
    • 5.2.3 Paper Setting for a Paper tray
  • 5.3 Both Sides Adjust
    • 5.3.1 Registration Loop Adjustment
    • 5.3.2 Chart Adjustment
    • 5.3.3 Zoom/Image Shift Adjustment
  • 5.4 Curl Adjustment (Relay Unit RU-508)
  • 5.5 Air Assist
  • 5.6 To Stop Printing
  • 5.7 Restarting Output the Next Day: Overnight Output
  • 5.8 Job List Screen
    • 5.8.1 Overview of the Job List Screen
      • Configuration of options
      • Screens available to be displayed/operated
    • 5.8.2 To Check and Operate Reserved Jobs
    • 5.8.3 Displaying Output History
    • 5.8.4 Checking Incomplete History
  • 5.9 Controlling and Monitoring Machine from Browser
    • 5.9.1 Controlling Machine from Browser: Remote Panel
    • 5.9.2 Monitoring Machine from Browser: Remote Monitor
    • 5.9.3 Monitoring Multiple Machines with Browser: Multi Monitor
  • 5.10 Using Perfect Binder PB-503
    • 5.10.1 Turning On/Off the Heater of the Perfect Binder
      • To turn on the heater of the perfect binder
      • To turn off the heater of the perfect binder
    • 5.10.2 Managing the Perfect Binder PB-503 and Glue Pellets
  • 5.11 Suspending/Resuming Output to Finisher FS-521
    • 5.11.1 To Suspend the Output Job
    • 5.11.2 To Cancel the Suspended Job
• 6 Supplies, Disposals, and Handling
  • 6.1 How to Display a Help Message
  • 6.2 Replenishing Toner Supply
  • 6.3 Replacing Toner Recovery Box
  • 6.4 Replenishing Staple Supply
    • 6.4.1 Replenishing Staple Supply in Finisher FS-521
    • 6.4.2 Replenishing Staple Supply in Finisher FS-612
    • 6.4.3 Replenishing Staple Supply in Saddle Stitcher SD-506
  • 6.5 Disposing Punch Waste
    • 6.5.1 Emptying Scrap Box of Folding Unit FD-503
    • 6.5.2 Emptying Scrap Box of Finisher FS-612
    • 6.5.3 Emptying Scrap Box of Multi Punch GP-501
  • 6.6 Disposing Trimmings
    • 6.6.1 Emptying Scrap Box of Saddle Stitcher SD-506
    • 6.6.2 Emptying Scrap Box of Perfect Binder PB-503
  • 6.7 Adding Glue Pellets to Perfect Binder PB-503
  • 6.8 Loading Paper
    • 6.8.1 Checking Paper to Be Loaded
    • 6.8.2 Loading Paper in Main Body Trays (Trays 1 to 3)
    • 6.8.3 Loading Paper in Paper Feeder Unit (Trays 4 to 9)
    • 6.8.4 Making Fine Adjustment on Side Guides of Paper Feeder Unit (Trays 4 to 9)
    • 6.8.5 Loading Small Size Paper in Paper Feeder Unit (Trays 4 to 6)
    • 6.8.6 Loading Paper in Post Inserter of Folding Unit FD-503
    • 6.8.7 Loading Paper in Post Inserter PI-502
  • 6.9 Loading Cover Paper for Perfect Binding
    • 6.9.1 Loading Cover Paper in Cover Tray of Perfect Binder PB-503
  • 6.10 Loading Tabbed Sheets
    • 6.10.1 Loading Tabbed Sheets in Main Body Trays (Trays 1 to 3)
    • 6.10.2 Loading Tabbed Sheets in Paper Feeder Unit PF-704
  • 6.11 Replacing Trim Receiver of Saddle Stitcher SD-506
  • 6.12 Replenishing Water Supply in Humidifier Tank of Relay Unit RU-508
  • 6.13 Removing Perfect-Bound Books from Perfect Binder PB-503 Tray
  • 6.14 Removing Finished Sets from Large Capacity Stacker LS-505
    • 6.14.1 Removing Finished Sets from the Stacker
    • 6.14.2 To Secure Paper on Carriage
• 7 Maintenance
  • 7.1 Cleaning
    • 7.1.1 Cleaning the Exterior
    • 7.1.2 Cleaning the Control Panel
    • 7.1.3 Cleaning the Conveyance Belt of Saddle Stitcher SD-506 Tray
    • 7.1.4 Cleaning Scrap Box of Multi Punch GP-501
  • 7.2 Checking Print Count
  • 7.3 Preventive Maintenance
  • 7.4 Holding Period of Performance Parts for Repair
• 8 Troubleshooting
  • 8.1 If [Please Call Service] Message Is Displayed: Call for Service
    • 8.1.1 Operations with Call for Service Screen Displayed
    • 8.1.2 Limited Use of the Machine
  • 8.2 If [Mishandled paper] Message Is Displayed
    • 8.2.1 To Remove Mishandled Paper
    • 8.2.2 Jam Number and Position Display
  • 8.3 If Paper Jam Indicator Lights on Perfect Binder PB-503
  • 8.4 If Burrs Remain in Punch Holes: Multi Punch GP-501
  • 8.5 If [MACHINE] Tab Flashes in Orange
    • 8.5.1 Paper Misfeed
    • 8.5.2 Tray Empty in a Copy Job in Progress
      • Supplying the tray with paper
      • Changing the tray selection
    • 8.5.3 Tray Empty in a Print Job in Progress
      • Supplying the tray with paper
      • Changing the tray selection
    • 8.5.4 Inconformity in Paper Size During a Print Job in Progress
      • Loading the designated tray with paper
      • Loading another tray with paper
      • Forcibly using paper loaded in a tray
    • 8.5.5 Inconformity in Paper Conditions During a Print Job in Progress
      • Loading the designated tray with paper
      • Loading another tray with paper
      • Forcibly using paper loaded in a tray
  • 8.6 If [Memory Full] Message Is Displayed
    • 8.6.1 Memory Overflow in Current Job
    • 8.6.2 Memory Overflow in Reserve Job
  • 8.7 Troubleshooting Tips
• 9 Adjustment
  • 9.1 Function Overview
    • 9.1.1 List of Adjustment Menu Items
  • 9.2 [01 Machine Adjustment]
    • 9.2.1 [01 Printer Adjustment] - [01 Restart Timing Adjustment]
    • 9.2.2 [01 Printer Adjustment] - [02 Centering Adjustment]
    • 9.2.3 [01 Printer Adjustment] - [03 FD-Mag. Adjustment]
    • 9.2.4 [01 Printer Adjustment] - [04 CD-Mag. Adjustment]
    • 9.2.5 [02 Scan Adjustment] - [01 Restart Timing Adjustment]
    • 9.2.6 [02 Scan Adjustment] - [02 Centering Adjustment]
    • 9.2.7 [02 Scan Adjustment] - [03 FD-Mag. Adjustment]
  • 9.3 [02 Execute Adjust Operation]
  • 9.4 [03 Finisher Adjustment] (Finisher FS-521)
    • 9.4.1 [01 Staple Finisher Adjustment] - [01 Staple Center Position]
    • 9.4.2 [01 Staple Finisher Adjustment] - [02 Paper Width Adj. (Staple)]
    • 9.4.3 [01 Staple Finisher Adjustment] - [03 Paper Width Adj. (Straight)]
    • 9.4.4 [01 Staple Finisher Adjustment] - [04 Exit Guide Center Pos. Adj.]
    • 9.4.5 [01 Staple Finisher Adjustment] - [05 Exit Guide Paper Width Adj.]
  • 9.5 [03 Finisher Adjustment] (Folding Unit FD-503)
    • 9.5.1 [02 Multi Folder (Punch) Adj.] - [01 Paper Width Adjustment]
    • 9.5.2 [02 Multi Folder (Punch) Adj.] - [02 Punch Vertical Position Adj.]
    • 9.5.3 [03 Multi Folder (Fold) Adj.] - [01 Half-Fold Position Adj.]
    • 9.5.4 [03 Multi Folder (Fold) Adj.] - [02 Tri-Fold-in Pos. Adj.]
    • 9.5.5 [03 Multi Folder (Fold) Adj.] - [03 Tri-Fold-out Pos. Adj.]
    • 9.5.6 [03 Multi Folder (Fold) Adj.] - [04 Double Parallel Pos. Adj.]
    • 9.5.7 [03 Multi Folder (Fold) Adj.] - [05 Z-Fold Position Adj.]
    • 9.5.8 [03 Multi Folder (Fold) Adj.] - [06 Gate Position Adj.]
  • 9.6 [03 Finisher Adjustment] (Large Capacity Stacker LS-505)
    • 9.6.1 [05 Stacker Adjustment] - [01 Paper Width Adjustment]
    • 9.6.2 [05 Stacker Adjustment] - [02 Paper Length Adjustment]
  • 9.7 [03 Finisher Adjustment] (Saddle Stitcher SD-506)
    • 9.7.1 [06 Saddle Stitcher Pos. Adj.] - [01 Staple Center Position]
    • 9.7.2 [06 Saddle Stitcher Pos. Adj.] - [02 Staple Paper Width Adj.]
    • 9.7.3 [06 Saddle Stitcher Pos. Adj.] - [03 Staple Pitch Adjustment]
    • 9.7.4 [06 Saddle Stitcher Pos. Adj.] - [04 Half-Fold Position Adj.]
    • 9.7.5 [06 Saddle Stitcher Pos. Adj.] - [05 Tri-Fold Position Adj.]
    • 9.7.6 [06 Saddle Stitcher Pos. Adj.] - [06 Fold Paper Width Adj.]
    • 9.7.7 [06 Saddle Stitcher Pos. Adj.] - [07 Trimming Adjustment]
    • 9.7.8 [06 Saddle Stitcher Pos. Adj.] - [08 Trimmer Receiver Adj.]
  • 9.8 [03 Finisher Adjustment] (Perfect Binder PB-503)
    • 9.8.1 [07 Perfect Binder Adjustment] - [01 Cover Trimming Adjustment]
    • 9.8.2 [07 Perfect Binder Adjustment] - [02 Cover Lead Edge Adj.]
    • 9.8.3 [07 Perfect Binder Adjustment] - [03 Spine Corner Forming Pos.]
    • 9.8.4 [07 Perfect Binder Adjustment] - [04 Glue Start Position]
    • 9.8.5 [07 Perfect Binder Adjustment] - [05 Glue Finish Position]
    • 9.8.6 [07 Perfect Binder Adjustment] - [06 Temperature Adjustment]
    • 9.8.7 [07 Perfect Binder Adjustment] - [07 Sub Compile CD Width Adj.]
    • 9.8.8 [07 Perfect Binder Adjustment] - [08 Clamp CD Width Adjustment]
    • 9.8.9 [07 Perfect Binder Adjustment] - [09 Cover Up/Down CD Width Adj.]
    • 9.8.10 [07 Perfect Binder Adjustment] - [10 Clamp FD Position Adj.]
  • 9.9 [03 Finisher Adjustment] (Finisher FS-612)
    • 9.9.1 [01 Saddle Stitcher Stopper]
    • 9.9.2 [02 Half-Fold Stopper Adj.]
    • 9.9.3 [03 Punch Adjustment] - [01 Vertical Position Adj.]
    • 9.9.4 [03 Punch Adjustment] - [02 Horizontal Position Adj.]
    • 9.9.5 [03 Punch Adjustment] - [03 Registration Adjustment]
    • 9.9.6 [03 Punch Adjustment] - [04 Paper Edge Detect Sensor]
    • 9.9.7 [04 Tri-Fold Adjustment]
    • 9.9.8 [05 2 Pos. Staple Pitch Adj.]
    • 9.9.9 [06 Post Inserter Tray Size]
    • 9.9.10 [07 Output Quantity Limit]
  • 9.10 [03 Finisher Adjustment] (Relay Unit RU-506)
    • 9.10.1 [01 Relay Stacker Adjustment] - [01 Paper Width Adjustment]
    • 9.10.2 [01 Relay Stacker Adjustment] - [02 Paper Length Adjustment]
  • 9.11 [04 Density Balance Adjustment]
    • 9.11.1 [01 Density Balance Chart Output]
    • 9.11.2 [02 Density Balance Data Reg/Del]
      • Registering colorimetric data measured with spectrophotometer
      • Editing and registering existing density balance data manually
      • Registering new density balance data manually
      • Duplicating/Deleting density balance data
      • Enabling/Disabling density balance data
  • 9.12 [05 Color Density Control]
    • 9.12.1 [01 Color Density Control]
    • 9.12.2 [02 Color Density Manual Control]
    • 9.12.3 [03 Register Paper Category]
      • Creating the custom colorimetric data
      • Deleting the custom colorimetric data
    • 9.12.4 Color Density Control Error
• 10 Utility Menu Screen
  • 10.1 Utility Menu Screen Outlines
    • 10.1.1 How to Access the Utility Menu Screen
    • 10.1.2 List of Utility Menu Items
      • 01 User Setting
      • 02 Administrator Setting
  • 10.2 [01 User Setting] - [01 System Setting]
    • 10.2.1 [01 Language Setting]
    • 10.2.2 [02 Unit Setting]
    • 10.2.3 [03 Paper Tray Setting] - [01 Paper Setting]
      • Paper type descriptions
      • Adding/Editing Paper Conditions
      • Deleting Paper Conditions
      • USB Import/Export Functionality for Paper Setting
      • To import the paper setting data
      • To export the paper setting data
    • 10.2.4 [03 Paper Tray Setting] - [02 Auto Tray Selection Setting]
    • 10.2.5 [03 Paper Tray Setting] - [03 Type for Auto Paper]
    • 10.2.6 [03 Paper Tray Setting] - [04 Dehumidify Fan Heater]
    • 10.2.7 [03 Paper Tray Setting] - [05 81-105 g/m2 Coated]
    • 10.2.8 [04 Reset Setting] - [01 Auto Reset Setting]
    • 10.2.9 [05 Default Screen Setting]
    • 10.2.10 [06 Power Save Setting]
    • 10.2.11 [07 Date/Time Setting]
    • 10.2.12 [08 Operation/Info. Sound Setting] - [01 Volume Setting]
    • 10.2.13 [08 Operation/Info. Sound Setting] - [02 Info. Sound Item Setting]
    • 10.2.14 [09 Key Response Time]
    • 10.2.15 [10 Service Port Device Setting]
  • 10.3 [01 User Setting] - [02 Common Setting]
  • 10.4 [01 User Setting] - [03 Printer Setting]
    • 10.4.1 [01 Gray Text Outline]
  • 10.5 [01 User Setting] - [04 Image Quality Setting]
    • 10.5.1 [01 Screen]
  • 10.6 [01 User Setting] - [05 Password Change]
  • 10.7 [02 Administrator Setting] - [01 System Setting]
    • 10.7.1 [01 Power Save Setting]
    • 10.7.2 [02 Date/Time Setting]
    • 10.7.3 [03 Weekly Timer Setting] - [01 Weekly Timer ON/OFF Setting]
    • 10.7.4 [03 Weekly Timer Setting] - [02 Time Setting]
    • 10.7.5 [03 Weekly Timer Setting] - [03 Date Setting]
    • 10.7.6 [03 Weekly Timer Setting] - [04 Select Time for Power Save]
    • 10.7.7 [03 Weekly Timer Setting] - [05 Password for Non-Business Hours]
    • 10.7.8 [04 Restrict User Access] - [04 Sample Print Restrict]
    • 10.7.9 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [01 Restart Timing Adjustment]
    • 10.7.10 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [02 Centering Adjustment]
    • 10.7.11 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [03 FD-Mag. Adjustment]
    • 10.7.12 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [04 CD-Mag. Adjustment]
    • 10.7.13 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [06 Registration Loop Adj.]
    • 10.7.14 [04/05 Expert Adjustment] - [01 Printer Adjustment] - [07 Pre-registration Adj.]
    • 10.7.15 [04/05 Expert Adjustment] - [02 Finisher Adjustment]
    • 10.7.16 [04/05 Expert Adjustment] - [03 Process Adjustment] - [01 Front & Back Density]
    • 10.7.17 [04/05 Expert Adjustment] - [03 Process Adjustment] - [02 Toner Density Sensor Speed]
    • 10.7.18 [04/05 Expert Adjustment] - [03 Process Adjustment] - [03 Maximum Density Adjustment]
    • 10.7.19 [04/05 Expert Adjustment] - [03 Process Adjustment] - [04 1st Trans. Dis- elec. Output]
    • 10.7.20 [04/05 Expert Adjustment] - [03 Process Adjustment] - [05 Scattering Filter Cleaning]
    • 10.7.21 [04/05 Expert Adjustment] - [03 Process Adjustment] - [06 Fusing Refresh Setting]
    • 10.7.22 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [01 Printer Gamma Offset Adj.]
    • 10.7.23 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [02 Stabilization Adj. Setting]
    • 10.7.24 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [03 Custom Screen]
      • Line screen (Line 1, Line 2)
      • Dot screen (Dot 1, Dot 2)
      • Stochastic
    • 10.7.25 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [04 Controller Image Comp. Set]
    • 10.7.26 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [05 Print Gamma Offset Auto. Adj (RU)]
    • 10.7.27 [04/05 Expert Adjustment] - [04 Quality Adjustment] - [06 Print Gamma Sensor Adj. (RU)]
    • 10.7.28 [04/05 Expert Adjustment] - [05 Execute Adjust Operation]
    • 10.7.29 [05/06 List/Counter]
    • 10.7.30 [06/07 Size Setting] - [01 K Size]
    • 10.7.31 [07/08 Perfect Binder Setting] - [01 Usable Paper Weight Select]
    • 10.7.32 [07/08 Perfect Binder Setting] - [02 Paper Count Limit for PB]
    • 10.7.33 [07/08 Perfect Binder Setting] - [03 Unfitting Cover Stop]
    • 10.7.34 [08/09 Operation Screen Customize] - [01 Font Weight Setting]
  • 10.8 [02 Administrator Setting] - [02 Administrator Registration]
  • 10.9 [02 Administrator Setting] - [03 User Auth./Account Track]
    • User Authentication and Account Track
    • Synchronizing User Authentication and Account Track
    • Using User Authentication and Account Track separately
    • 10.9.1 [01 Authentication Method]
    • 10.9.2 [02 User Authentication Set] - [01 Management Setting]
    • 10.9.3 [02 User Authentication Set] - [02 User Registration]
    • 10.9.4 [02 User Authentication Set] - [03 User Counter]
    • 10.9.5 [03 Account Track] - [01 Account Track Registration]
    • 10.9.6 [03 Account Track] - [02 Account Track Counter]
    • 10.9.7 [04 Print without Authentication]
  • 10.10 [02 Administrator Setting] - [04 Network Setting]
    • 10.10.1 [01 Machine NIC Setting]
    • 10.10.2 [02 E-mail Initial Setting]
    • 10.10.3 [03 http Communication Setting]
  • 10.11 [02 Administrator Setting] - [05 Common Setting]
  • 10.12 [02 Administrator Setting] - [06 System Connection]
    • 10.12.1 [01 Administrator Call]
  • 10.13 [02 Administrator Setting] - [07 Security Setting]
    • 10.13.1 [01 Administrator Password]
    • 10.13.2 [02 HDD Management Setting] - [01 HDD Lock Password]
    • 10.13.3 [02 HDD Management Setting] - [02 Delete Temp. Data Setting]
    • 10.13.4 [02 HDD Management Setting] - [03 Delete All Data Setting]
    • 10.13.5 [02 HDD Management Setting] - [04 Delete hold Job]
    • 10.13.6 [02 HDD Management Setting] - [05 Delete HDD Job]
    • 10.13.7 [02 HDD Management Setting] - [06 HDD Restore/Backup]
    • 10.13.8 [02/03 Enhanced Security Mode]
  • 10.14 [03 Touch Panel Adjustment]
• 11 Controller Administrator Setting (IC-601)
  • 11.1 How to Display the Controller Administrator Setting Screen
  • 11.2 [Controller] - [01 Controller NIC Setting Menu]
    • List of Controller NIC Setting
  • 11.3 [Controller] - [02 Scan Setting]
    • 11.3.1 [01 User Box Setting]
  • 11.4 [Controller] - [03 System Setting]
    • 11.4.1 [01 Software Switch Setting]
      • List of Software Switch Setting
    • 11.4.2 [02 Default Machine Setting]
• 12 PageScope Web Connection Setting (IC-601)
  • 12.1 PageScope Web Connection Outlines
    • 12.1.1 System Requirements
    • 12.1.2 Web Browser Settings
      • 1. JavaScript
      • 2. Cookies
      • 3. Cache
  • 12.2 Access
  • 12.3 Configuration of Administrator Mode Screen
  • 12.4 [Maintenance] Tab
    • 12.4.1 Meter Count
    • 12.4.2 ROM Version
    • 12.4.3 Import/Export
      • Import
      • Export
    • 12.4.4 Status Notification Setting
      • Edit
      • Delete
    • 12.4.5 Machine Setting
    • 12.4.6 Online Assistance
    • 12.4.7 Reset - Network Setting Clear
  • 12.5 [Security] Tab
    • 12.5.1 Authentication
    • 12.5.2 Default Function Permission
    • 12.5.3 User Registration
      • User Registration
      • To delete a user
    • 12.5.4 Account Track Registration
      • Account Track Registration
      • To delete an account
    • 12.5.5 SSL/TLS Setting - SSL/TLS Setting
      • Creating a self-signed certificate
      • Making a request for certificate
      • Installing a certificate
      • Setting the encryption strength
      • Setting the mode using SSL
      • Removing a certificate
      • Downloading a certificate
    • 12.5.6 SSL/TLS Setting - Action for Invalid Certificate
    • 12.5.7 Auto Logout
    • 12.5.8 Administrator Password Setting
  • 12.6 [Print Setting] Tab
    • 12.6.1 Direct Print Setting
      • Basic Setting
      • PCL Setting
      • PS Setting
      • TIFF Setting
      • XPS Setting
    • 12.6.2 Driver Print Setting
    • 12.6.3 Job Spool Setting
    • 12.6.4 Interface Setting
    • 12.6.5 Select Printer Setting
  • 12.7 [Scan] Tab
    • 12.7.1 Subject
      • Edit
      • Delete
    • 12.7.2 Text
      • Edit
      • Delete
    • 12.7.3 Scanner Settings
  • 12.8 [Network] Tab
    • 12.8.1 TCP/IP Setting - TCP/IP Setting
    • 12.8.2 TCP/IP Setting - IP Filtering
    • 12.8.3 TCP/IP Setting - IPsec Setting
      • IPsec Setting
      • IKE Setting
      • IPsec SA Setting
      • Peer
    • 12.8.4 Time Adjustment Setting
    • 12.8.5 E-mail Setting - E-mail RX (POP)
    • 12.8.6 E-mail Setting - E-mail TX (SMTP)
    • 12.8.7 LDAP Setting - LDAP Setting
    • 12.8.8 LDAP Setting - Setting Up LDAP
    • 12.8.9 IPP Setting
    • 12.8.10 FTP Setting - FTP Send Setting
    • 12.8.11 FTP Setting - FTP Server Setting
    • 12.8.12 SNMP Setting
    • 12.8.13 SMB Setting - WINS Setting
    • 12.8.14 SMB Setting - Client Setting
    • 12.8.15 SMB Setting - Print Setting
    • 12.8.16 SMB Setting - Direct Hosting Setting
    • 12.8.17 Web Service Setting - Web Service Setting
    • 12.8.18 Web Service - Print Setting
    • 12.8.19 Web Service Setting - Scanner Settings
    • 12.8.20 Bonjour Setting
    • 12.8.21 NetWare Setting - NetWare Setting
    • 12.8.22 NetWare Setting - NetWare Status
    • 12.8.23 AppleTalk Setting
    • 12.8.24 OpenAPI Setting
    • 12.8.25 TCP Socket Setting
    • 12.8.26 IEEE802.1X Authentication Setting - IEEE802.1X Authentication Setting
    • 12.8.27 IEEE802.1X Authentication Setting - IEEE802.1X Authentication Trial
    • 12.8.28 JSP Setting
  • 12.9 Operator Call
    • List of Error Codes in Operator Call
• 13 Web Utilities Setting
  • 13.1 Web Utilities Outlines
  • 13.2 Setting Account Track Data
    • 13.2.1 Adding Account Track
    • 13.2.2 Editing Account Track Data
  • 13.3 Setting Remote Panel, Remote Monitor, and Multi Monitor
  • 13.4 Setting Scan Transmission Function
  • 13.5 Transmitting Setting Data
    • To create/edit the setting data
    • Specifications for each setting data type
  • 13.6 Displaying Job History
    • 13.6.1 Turning On/Off Job History
    • 13.6.2 Displaying Job History List
• 14 Specifications
  • 14.1 Main Body Specifications
    • 14.1.1 Main Body
    • 14.1.2 2nd Fusing Unit EF-101
  • 14.2 Original Related Option Specifications
    • 14.2.1 ADF (Equipped with Paper Feeder Unit (with scanner) PF-705)
  • 14.3 Feeding Option Specifications
    • 14.3.1 Paper Feeder Unit PF-704
    • 14.3.2 Paper Feeder Unit (with scanner) PF-705
    • 14.3.3 Post Inserter of Folding Unit FD-503
    • 14.3.4 Post Inserter PI-502 (Equipped in Finisher FS-612)
    • 14.3.5 Dehumidifier Heater HT-506
  • 14.4 Output Option Specifications
    • 14.4.1 Relay Unit RU-508
    • 14.4.2 Humidifier HM-101
    • 14.4.3 Finisher FS-521
    • 14.4.4 Folding Unit FD-503
    • 14.4.5 Large Capacity Stacker LS-505
    • 14.4.6 Saddle Stitcher SD-506
    • 14.4.7 Perfect Binder PB-503
    • 14.4.8 Finisher FS-612
    • 14.4.9 Multi Punch GP-501 (Die Set DS-508 to DS-518)
    • 14.4.10 Relay Unit RU-506
  • 14.5 Electronic Option Specifications
    • 14.5.1 Image Controller IC-601
    • 14.5.2 Image Controller IC-306
    • 14.5.3 Image Controller IC-307
  • 14.6 Other Options
  • 14.7 Incompatible Copy Conditions
    • 14.7.1 Copy Conditions Incompatible with Basic Settings and Original Settings
    • 14.7.2 Copy Conditions Incompatible with Quality Adjustment, Application, and Output Settings
• 15 Index
  • 15.1 Index by item
  • 15.2 Index by button