Enterasys Networks 1G58x-09 - Manual (Page 108)

General Configuration Command Set
Managing Switch Configuration Files
3-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
This example shows how to regenerate the current set commands:
3.2.5.3 configure
Use this command to execute a previously downloaded configuration file, schedule a configuration
update for a later time, cancel a configuration update, or display scheduled configuration update
information.
configure {[filename [append] [at time] [in time] [reason reason] | show |
cancel}
Matrix>show config
Creating CLI device configuration Set commands!
!
! cdp
!
! community
!
! dns
!
! garp
!
! gvrp
!
! history
!
! host vlan
!
! igmp
set igmp enable
!
! ip
set ip address 10.2.242.112 mask 255.255.240.0 gateway
10.2.240.1
--More--