Enterasys Networks 1G58x-09 - Manual (Page 717)

Security Configuration Command Set
Configuring MAC Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-35
14.3.3.3 set macauthentication
Use this command to globally enable or disable MAC authentication.
set macauthentication {enable | disable}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to globally enable MAC authentication:
Reauth Period Reauthentication period for this port, set using the set
macauthentication reauthperiod command described in
Section 14.3.3.11 .
Reauthentications Whether or not reauthentication is enabled or disabled on
this port. Set using the set macauthentication
reauthentication command described in
Section 14.3.3.8 .
enable | disable Globally enables or disables MAC authentication.
Matrix>set macauthentication enable
Table 14-4 show macauthentication session Output Details (Continued)
Output What It Displays...